Why your dashboard's drop rate doesn't match VICIdial's report
Dashboards often divide dropped calls by every number dialed; VICIdial divides by calls a person answered. Why that gap matters and which number to trust.
Your dashboard shows a drop rate you're comfortable with. Then someone pulls VICIdial's own report for the same campaign and the same day, and the number is many times higher. Which one is lying?
Neither, strictly. They count the same dropped calls and divide them by different things. Only one of those things is what your drop limit is measured against.
Same drops, a different bottom line
A Drop rate is a fraction: dropped calls on top, some total underneath. A drop is a call a person answered that no agent picked up in time. Both tools agree on that part.
They disagree on the total. Some dashboards divide by every number dialed. VICIdial's report divides by calls a person answered. No-answers, busy signals, dead numbers and answering machines never reach a person, so they swell the dashboard's total and shrink its percentage.
One campaign we looked at, on one day:
| Dashboard | VICIdial report | |
| Divides dropped calls by | Every number dialed | Calls a person answered |
| Drop rate, same campaign, same day | 1.23% | 28.89% |
| Matches how drop limits are measured | No | Yes |
Same calls, same drops. The dashboard said the campaign was fine. VICIdial said almost three in ten people who picked up got nobody.
flowchart TD
D[Numbers dialed] --> N[No answer, busy, machine, dead number]
D --> H[Answered by a person]
H --> A[Reached an agent]
H --> X[Dropped]
X --> R[VICIdial divides by answered by a person]
X --> W[Some dashboards divide by all dialed]Why VICIdial's number is the one that counts
Drop limits are measured against calls a person answered, and VICIdial follows the same rule. A campaign's Drop percentage limit caps dropped calls as a share of human-answered calls, not of everything dialed.
The dialer steers by that number too. With an Adaptive dialing method such as ADAPT_HARD_LIMIT, VICIdial dials predictively up to the drop limit, then stops dialing aggressively until the percentage comes back down. Our post on what the Drop Percentage Limit setting does covers the setting itself.
So a dashboard that divides by every dial isn't just another style of counting. It hides the figure your dialer and your limit both run on. If the two disagree, believe VICIdial.
How to make the two agree
- Find out what your dashboard divides by. Ask whoever built it, or check one day by hand: take its dropped count and divide by the calls a person answered.
- Fix the formula, or rename the number. Drops per dial can be useful for judging a list, but it shouldn't sit on a wallboard labelled "drop rate".
- Compare like with like. Make sure both numbers cover the same campaigns and the same hours before you chase a gap.
- Act on VICIdial's figure. If it's over the limit, the usual suspects are pacing and a slow hand-off to agents. Why VICIdial drops calls while agents sit ready walks through both, and how to lower your drop rate covers the dialing side.
Where we show it
On the clusters we run, the cluster page lists each Campaign with its dial level, its hopper and its drops against its limit. When a campaign goes over, a red or amber line appears at the top of the page, worst problems first. It's one of the checks described in our guide to VICIdial clusters.
You don't need a cluster to read the right number; VICIdial's own report has it on one server. If one server is enough for your floor, start on a plan. If you're growing past it, size your cluster and see today's prices.
Related from VICIfast
- Work out your abandonment ratePut your own numbers in and see where you sit.
- The predictive dialer guideRatios, pacing, abandonment, and where teams get it wrong.
- Reporting, agent stats, and exportsOutbound, inbound and agent reports, run live, with exports and scheduled email.
- Bring your own server - $29/moYour VPS or on-prem hardware; we install and manage VICIdial over SSH.
About VICIfast
We run VICIdial servers for call centres, so you don’t have to. You get the dialer set up, secured and kept running — we handle the server, the updates and the backups. Bring your own phone carrier at no markup, or use VICIfast Voice, our own US calling and numbers, from $0.0085 a minute. From $49 a month per server.
Questions? Call +1 636 556 0022 and talk to someone who runs dialers.
Citing this article
VICIfast Engineering. “Why your dashboard's drop rate doesn't match VICIdial's report”. VICIfast LLC, November 22, 2026. Retrieved from https://vicifast.com/blog/vicidial-drop-rate-dashboard-vs-report
Have questions?
Related posts
You might be interested in
Guides & tutorials
When a CRM polls VICIdial once per agent: the load you don't see
Guides & tutorials
Idle campaigns left active: the hidden database load in VICIdial
Guides & tutorials
Why searching a lead by phone number freezes VICIdial, and the missing index

Guides & tutorials
Keep the call log small: log archiving on a busy VICIdial database
VICIfast newsletter
Liked this? Get the next one in your inbox.
We ship the kind of stuff you just read - concrete, numbers-first, no drip. One email when a new post goes live. Unsubscribe in one click.
Comments
No comments yet - be the first.



