VICIfast
ENES
Guides & tutorials

Why VICIdial drops calls while agents sit ready

Calls dropping while agents wait in READY often means the hand-off is stuck behind a database lock, not that you dial too hard. How to tell the two causes apart.

VICIfast Support
··3 min read
Call-centre agent wearing a headset — illustration for: Why VICIdial drops calls while agents sit ready
Photo by Yan Krukau on Pexels

Your drop rate is climbing, yet the real-time screen shows agents waiting for calls. It looks impossible: a customer answered, an agent was free, and still nobody said hello. There are two usual reasons, and the fix for one does nothing for the other.

What VICIdial counts as a drop

A drop is an answered call that no agent took in time. The clock starts when the customer picks up, and the campaign's Drop Call Seconds setting decides how long it runs before the call counts as dropped. Drop Call Action then decides what happens next: a hang-up, your Safe Harbor message, or another destination you pick.

Your Drop rate is those calls divided by calls a person answered. That's the number the campaign's Drop percentage limit is measured against.

The hand-off goes through the database

Here's the step most people never see. When a customer answers, the dialer doesn't push the call straight to a headset. VICIdial asks the database which agent is free, then connects the call to that agent's line.

Normally that takes no noticeable time. But if the tables the hand-off needs are locked, because a report, stats tool or lead search is reading the call log, the hand-off waits. The drop timer doesn't wait with it. The agent is ready, the customer is there, and the call between them sits in a queue for the database.

flowchart LR
  C[Customer answers] --> T[Drop timer starts]
  T --> H{Database free?}
  H -->|yes| A[Agent hears hello]
  H -->|no, table locked| W[Hand-off waits]
  W -->|lock clears in time| A
  W -->|timer runs out| X[Call counted as drop]

How much this happens depends on what reads the call log during the shift. On one floor, taking a single stats tool off the call log cut lock waits from 58 a second to 13.

Or the floor is dialing more than it can take

The other cause is Dialer pacing, how many lines the dialer places for each agent. Set the Auto dial level too high and more customers answer at once than there are free agents, so some wait past the timer.

One setting worth checking here is Available-only tally. Set to Y, it counts only agents who are ready when working out how many calls to place, instead of also counting agents still on a call. If you need to bring the pace down, here's how to slow VICIdial's dialing.

Telling the two apart

Watch the Real-time report at the moments drops land, not over the whole day.

  • Every agent is on a call when the drops happen: pacing. The floor is reaching more people than it can talk to.
  • Agents sit in Ready state and calls still drop: the database. Look for what was reading the call log at those times: a day-long report, a stats page, a lead search by phone number.
  • Drops arrive in bursts while the screens also freeze: the database again, because agent screens wait on the same tables.
Don't lower the dial level to fix drops that happen with agents ready. You'll reach fewer customers per hour, the lock stays, and the next long report drops calls again.

For a wider checklist of causes, see why a drop rate suddenly spikes. On our clusters, the cluster page warns when a campaign is over its drop limit and shows how many calls are waiting and the longest wait, so a stalled hand-off shows up while it's happening.

Taking the lock off the floor's path

The fix is to stop long reads touching the call log while agents are dialing. Move day-long reports out of the shift, slow down or move stats tools, and keep the log tables small with VICIdial's log archiving. On every cluster we run, we look for whatever reads the call tables mid-shift and move it off the floor's path. The cluster guide explains why the database machine is the one to protect.

Frequently asked

› Should I lower the dial level when calls drop with agents ready?
Not first. If agents are waiting when the drops land, pacing isn't the cause. Find what is locking the database, or you'll dial fewer customers and keep the drops.
› Does this happen on a single server too?
Yes. The lock is in the database either way. On one server the database also shares its cores with the calls, so a busy report slows both.

Growing past one server anyway? Book a sizing call and we'll plan the database and dialers around your agents and dial level. Smaller floors are fine on one of our plans for now; the report fixes above work there too.

About VICIfast

We run VICIdial servers for call centres, so you don’t have to. You get the dialer set up, secured and kept running — we handle the server, the updates and the backups. Bring your own phone carrier at no markup, or use VICIfast Voice, our own US calling and numbers, from $0.0085 a minute. From $49 a month per server.

Questions? Call +1 636 556 0022 and talk to someone who runs dialers.

Citing this article

VICIfast Engineering. “Why VICIdial drops calls while agents sit ready”. VICIfast LLC, November 21, 2026. Retrieved from https://vicifast.com/blog/vicidial-calls-drop-while-agents-ready

Have questions?

Related posts

You might be interested in

Comments

Comments are reviewed before they appear. We never publish your email.

No comments yet - be the first.